DUALSKY PCM(セルバランサー) 2005.11.14更新

待望の安価なセルバランサーが発売されました。ただし、セルバランス機能があるのはPCM3Sのみです。
 (PCM2Sはガード機能のみ)
 
●製品の特徴(PCM3S)
 
本製品はDualSky社製のリチウムポリマーバッテリ(11.1V)専用の直列制御セルバランサーです。
PCM3Sのバランス電流は弱いので数回連続して使用すると良い結果が得られます。
バランス対象となるセルは最初に4.25Vに近づいた1セル目が対象となり、対象セルの充電電流が制限されます。
全体充電電圧が12.60Vになると充電を遮断します。(充電完了)
 
●使用方法 (接続例)
 
充電の際に充電器とDualSky社製リポのバランスコネクタに接続して使用します。
充電電圧は3S(11.1V)とし、充電電流は1C以下に設定します。(最大5A)
(ポリクエスト、E-TECのコネクタとは配線が違いますので使用できません。)
 
●使用可能な充電器
 
大概の直列タイプの充電器で使用可能と思われますが、充電器の開放電圧、エラーチェック等により使用できない機種もあります。
(SM-2020 SM-2030は使用可能です。)
 
●セルバランサーとは?
 
各セルの電圧を揃えて充電をすることにより、本来の出力性能を維持して、安全に使用するためのものです。
すでに痛んでしまったセルや、製造時にマッチングの取れていないリポ(パック)に対しては効果は期待できません。
 

PCM2S/PCM3S - Protection Circuit Module

 
PCM2S - Prevents overcharge due to cell imbalance.
PCM3S - Prevents overcharge and balances each cell in the one series packs.
Handles 2-3 cells of lithium-polymer battery packs.
Before charging, connect the JST plugs of PCMs and chargers, connect the charging plugs of PCMs and batteries.

 hspace=0
Click to enlarge

 
Model
PCM2S
PCM3S
Number of cells
2Cells
3Cells
Input
2 Cells LiPo Charger
3 Cells LiPo Charger
Output
Voltage: Max. 8.4V
Voltage: Max. 12.6V

 Max Charging Current

 5A

 Protect Voltage

 4.3V ±0.03V

 Balance

 No

 Yes

Weight
7.6g
8.2g
Dimensions
38(L) x 23(W) x 5(H)mm

 

OC305ADJ JOYCHARGER Automatic Outdoor Charger

 

 

Type of battery

Li-Polymer/NiCd/NiMH

Input 

DC 11V to 15V
Max approx. 3A

Number of cells

1-3 Li-Poly Cells
1-8 NiCd/NiMH Cells

Charge Voltage

Li-Poly: 4.2V,8.4V,12.6V
NiCd/NiMH: Automatic

Charge Current

0.3A,0.6A,1.2A,2A

Weight

80g

Dimensions

92(L) x 55(w) x 12(H)mm

hspace=0
Click to enlarge

   
Constant voltage or constant current (CVCC) configuration optimally charges Lithium-Polymer battery cells.
High frequency switch mode topology is adopted to achieve high efficiency, small size, cool temperature and lightweight.
Reverse polarity protection both at input and output is provided.
Low-voltage detection circuit enables a wake up charge source of 30mA automatically to precondition a deeply discharged pack when the cell voltage drops below a preset limit.
Two LEDs in red and green are used to indicate information of charging modes and alarms.